SUBFRAME With Steering Gear, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, 2021 Audi S7, and 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine Support Bridge - Special Hook (2 pc.): 10-222A/20
- Torque Wrench 1331 5-50Nm: VAG1331
- Torque Wrench 1332 40-200Nm: VAG1332
- Hose Clip Pliers: VAS6362
- Ball Joint Splitter (kukko 129-3): VAS251805
- Ball Joint Splitter: VAS251809 with : VAS251809/1
- Tensioning Strap: T10038
- 14 mm internal multi-point socket with corner extension, commercially available (for 3.0L TFSI engine)