Rear Lid Motor 1 And 2 -V444- And -V445-, Adapting

-- Connect the Vehicle Diagnostic Tester.

-- Switch the ignition on.

-- Select and start the Diagnostic  operating mode.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• Diagnostic-Capable Systems
• 006D - Rear Lid Electronics J605
• 006D - Rear Lid Control Module, Functions
• 006D - Basic Setting, Rear Lid Control Module

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.