Fuel Filler Door Unit Drain Hose, Removing And Installing
Removing
-- Loosen the rear section of the right wheel housing liner and push it to the side. Refer to OVERVIEW - REAR WHEEL HOUSING LINER .
-- Free up the drain hose -1- -arrows-.
-- Open the fuel filler door.
-- Remove the drain hose upward from the fuel filler door unit.
Installing
Install in reverse order of removal and note the following:
-- Insert the drain hose -1- from above into the fuel filler door cup -2-.
- The collar -arrow- on the drain hose must be on top.
-- Insert the drain hose into the mount.