Passenger Side Airbag Assembly Overview
CAUTION:
- Airbag power supply connector and battery ground strap must always be disconnected before working on the airbag or related systems.
- Connector remains connected when using scan tool: VAG1551 .
- Always obtain the correct radio security code before disconnecting the battery ground strap.
NOTE:
The glove compartment must be removed for access to the passenger side airbag unit. Refer to GLOVE COMPARTMENT .
- Retaining Bracket
- Bolts
- 6.0 Nm (53 in lb)
- Passenger Side Airbag Unit
- Place so horn pad faces up.
- Pry off bracket, refer to Removing Locking Bracket .
- Disconnect electrical connectors from airbag unit.
- Bolts
- 6.0 Nm (53 in lb)
- Mounting Bolt
- 15 Nm (11 ft lb)
- Support Bracket
- Mounting Bracket
- Bolt
- 15 Nm (11 ft lb)