Airbag Connector, Replacing: Removing
-- Remove the driver side airbag. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
CAUTION:
Pyrotechnical components can deploy unintentionally.
There is a risk of injury.
- Discharge static electricity by briefly touching the door striker.
-- Release the connector lock -2- for the connector -1- with a small flat-head screwdriver in direction of -arrow-.
-- Disconnect the connectors -1 and 3- from the Driver Airbag Igniter -N95- and Driver Airbag Release Valve Igniter -N490-.
-- Disconnect the connectors -4- by releasing the retaining tab.
-- Disengage and remove the wiring harness -2- at the brackets.