Upper Timing Chain Cover, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi A6 Quattro and 2021 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Replace the gaskets and seals if damaged or leaking.
Replace the O-rings after removing them.

-- Coat the seals and the O-rings with engine oil.

Seal installation position: smaller inner diameter outward.

-- Install the camshaft adjustment valves. Refer to Camshaft Adjustment Valve 1 -N205- / Exhaust Camshaft Adjustment Valve 1 -N318-, REMOVING AND INSTALLING .

-- Install the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .