Crankcase Pressure Sensor -G1068-, EMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2022 Audi A6 Quattro and 2021 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Check the O-ring in the Crankcase Pressure Sensor -G1068- for damage. Refer to OVERVIEW - CRANKCASE VENTILATION .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .