Exhaust System, Installing Without Tension
WARNING: This page is about a different car, the 2022 Audi A6 Quattro and 2021 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
- Align the exhaust system when cold.
-- Loosen the front clamping sleeve -arrows-.
-- Push the exhaust system far enough forward -arrow- until the pretension on the retaining loop -1- at the exhaust pipe is -a- = 6 to 10 mm.
-- Position the front clamping sleeve (refer to appropriate service information ) and tighten the threaded connections evenly.
Tightening Specifications
- Refer to OVERVIEW - MUFFLER