Crankshaft, Measuring Axial Clearance
WARNING: This page is about a different car, the 2022 Audi A6 Quattro and 2021 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Dial Indicator Holder: VW387
- Dial Indicator - 0-10mm: VAS6079
Procedure
-- Attach the : VAS6079 with the : VW387 to the cylinder block and place it against the crankshaft counterweight.
-- Press the crankshaft against the dial gauge by hand and set the dial gauge to "0".
-- Press the crankshaft off the dial gauge and read the measurement.
Axial clearance:
- New: 0.070 to 0.231 mm.
- Wear limit: 0.30 mm.