Engine, Removing From Scissor Lift Table

WARNING: This page is about a different car, the 2022 Audi A6 Quattro and 2021 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Lifting Support:2024B
Shop Crane:VAS6100

Procedure

Engine/transmission assembly removed and separated on :VAS6131B . Refer to ENGINE AND TRANSMISSION, SEPARATING .

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

There is a risk of injury from the lifted motor falling.

The possibility for parts of the body to be pinched or crushed increases.

- Secure the mounting hooks and pins on the lifting tackle with a securing pin.

-- Engage the :2024B -1- as shown on the engine lifting eye and on the :VAS6100 -2-.

-- Insert the securing pins -arrows- to secure the mounting hooks and alignment pins.

CAUTION:

Risk of injury due to the engine weight shifting.

The possibility for parts of the body to be pinched or crushed increases.

- Transport the engine only without the transmission using the method described.

-- Tension the engine slightly with the shop crane, but do not lift.

-- Remove the :VAS6131/13-7 from the engine.

Courtesy of AUDI OF AMERICA, LLC

-- Pry up the engine with the workshop crane.