LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> S6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 435 (Engine Assembly [DMTA,DPAA,DPUA,DPVA,DMTC]) >> 10 Engine Assembly >> Assembly Mounts >> Overview - Assembly Mounts >> Overview - Dual Clutch Transmission Mount, Version 1

Overview - Dual Clutch Transmission Mount, Version 1

WARNING: This page is about a different car, the 2022 Audi A6 Quattro and 2021 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Dual Clutch Transmission Mount
GWWA10-11614Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • Tightening specifications. Refer to the appropriate service information .
  2. Tunnel Crossmember
    • Removing and installing. Refer to the appropriate service information .
  3. Stop
    • For the transmission mount
  4. Transmission Mount
  5. Transmission
  6. Nut
    • Tightening specifications. Refer to the appropriate service information .
    • Only remove when the transmission mount must be separated from the transmission support
  7. Transmission Support
  8. Bolt
    • Tightening specifications. Refer to the appropriate service information .
  9. Bolt
    • Tightening specifications. Refer to the appropriate service information .
    • Only remove when the transmission mount must be separated from the transmission support
  10. Nut
    • Tightening specifications. Refer to the appropriate service information .
    • Only remove when the transmission mount must be separated from the transmission support
scientia non olet · About LEMON Manuals