Left Engine Support, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Replace the bolts that were tightened with an additional turn after removing them.
-- Connect the coolant hose to the connector coupling. Refer to Fig 1.
-- Install the support bearing. Refer to SUPPORT BEARING, REMOVING AND INSTALLING .
-- Install the engine cover. Refer to ENGINE COVER .