Radiator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .
Change all of the coolant after replacing the radiator.

-- Install the charge air cooler. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .

-- Install the impact member. Refer to IMPACT MEMBER, REMOVING AND INSTALLING .

-- Connect the coolant hose to the connector coupling. Refer to Figure.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .