Coolant Pump, Removing And Installing: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

Vehicles with a Particulate Filter:

Courtesy of AUDI OF AMERICA, LLC

-- Lift the clamp -3-, remove and free up the coolant hose.

-- Disconnect the connector -1- for the Engine Coolant Level Warning Switch -F66-.

-- Remove the bolt -4- and remove the coolant expansion tank -2-.

Continuation for All:

Courtesy of AUDI OF AMERICA, LLC

-- Lift the clamp -2- and remove the coolant hose.

-- Lift the clamp -1-, loosen the hose clamp -2- and remove the coolant hoses.

Courtesy of AUDI OF AMERICA, LLC

-- Unlock the catch in direction of -arrow A- and release in direction of -arrow B-, and remove the vacuum hose.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors -2 to 5-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and move the bracket -2- with the engine wiring harness to the side.

Courtesy of AUDI OF AMERICA, LLC

All other procedures are described. Refer to COOLANT PUMP, REMOVING AND INSTALLING .