Coolant Pump, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Additional procedures:
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
-- Connect the coolant hose to the connector coupling. Refer to Figure.
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .