Cam Position Sensor 3 -G300-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Replace the O-ring after removing.
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
Additional procedures depending on the model. Refer to CAMSHAFT POSITION SENSOR, REMOVING AND INSTALLING .