Cam Position Sensor -G40-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- If installed, remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Version: remove the MPI fuel injectors with fuel rail and lay aside. Refer to FUEL INJECTORS, REMOVING AND INSTALLING, MPI SYSTEM .
-- Remove the bolt -1-, and remove the Cam Position Sensor -G40- -2-.