Cam Adjustment Actuator, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work may be required depending on the model. Refer to Valvetrain ; Cam Adjustment Actuator, Removing and Installing.
-- If installed remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -2-.
-- Remove the bolt -1- and the cam adjustment actuator.