Engine Oil Cooler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the sub-assembly bracket. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .

-- Remove the bolts -4 and 5- and remove the engine oil cooler -3- with the seal -2- from the sub-assembly bracket -1-.

Fig 1: Identifying Oil Cooler, Bolts And Seal

Courtesy of AUDI OF AMERICA, LLC