Oil Separator, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cylinder ignition coils "3 and 4".Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
-- Loosen the hose clamp -1- and remove the hose from EVAP Canister Purge Regulator Valve 1 -N80-.
-- Remove the bolt -2- and remove the crankcase ventilation hose -3- from oil separator. Release the catches to do so if necessary.
-- Remove the bolts -arrows- and the oil separator.