Sealing Flange, Removing And Installing, Transmission Side: Removing
WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicles without high-voltage system: transmission removed. Refer to the appropriate service information .
- Vehicle with high-voltage system: engine is removed and is secured on the :VAS6931 . Refer to ENGINE, SECURING TO Engine and Transmission Holder .
-- Remove the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .
-- Remove the bolts -1 through 8-. (There is also equipment with only six bolts depending on the version).
-- Loosen the sealing flange from the bond.
-- Cover open engine components.