Drive Plate, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission removed. Refer to the appropriate service information .
-- Insert the :10-201 to loosen the bolts.
CAUTION:
Risk of damaging the drive plate by using an unsuitable tool.
- When loosening and tightening the bolts, do not damage the drive plate centering flange.
-- Remove the drive plate bolts -1- using an internal multi-point socket with at least a 40 mm shaft length.