Vibration Damper, Removing And Installing, Starter Generator: Notes
WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Wrench - 21mm:T40263
- Adapter:T40314
- Counterhold:T40378 or
- Counterhold:T40379
- Vibration Damper Assembly Tool:T10531
- Vibration Damper Assembly Tool - Adapter:T10531/5
- Assembly Tool:T10531/5-/6
- The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.