Ribbed Belt TENSIONING Damper, Removing And Installing, Vehicles With Starter Generator

WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the ribbed belt from the tensioner. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the tensioner -1-.

Installing

Install in reverse order of removal and note the following:

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

Tightening Specifications

Refer to OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE, VEHICLES WITH STARTER GENERATOR