Sensor Wheel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi A6 Quattro, 2020 Audi A6 Quattro, and 2019 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- The engine is secured to the :VAS6095A . Refer to ENGINE, SECURING TO Engine and Transmission Holder .
-- Remove the transmission side sealing flange. Refer to SEALING FLANGE, REMOVING AND INSTALLING, TRANSMISSION SIDE .
-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .
-- Remove the balance shaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
-- Remove the connecting rod bearing cap.
-- Remove the crankshaft bearing cap.
-- Remove the crankshaft and the sensor wheel.