Contact Corrosion

WARNING: This page is about a different car, the 2022 Audi A6 Quattro and 2021 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Contact corrosion can occur if incorrect fasteners (bolts, nuts, washers, etc.) are used.

For this reason, only fasteners with a special surface coating may be installed.

Furthermore, only rubber/plastic parts and adhesive made of electrically non-conductive materials are used.

If there are doubts about whether parts can be used or not, then use new parts.

Note:

Only original replacement parts are recommended. They are checked and compatible with aluminum.
The use of Audi accessories is recommended.
Contact corrosion damage is not covered under warranty.