Component Location Overview - Heat Shields

Courtesy of AUDI OF AMERICA, LLC

1. Heat Shield
   • For the rear muffler
   • Tightening Specifications:
     • Spring nuts: 2 Nm
2. Heat Shield
   • Rear floor
   • Tightening Specifications:
     • Spring nuts: 2 Nm
3. Heat Shield
   • For the driveshaft
4. Heat Shield
   • For the tunnel rear
   • Removing and Installing. Refer to HEAT SHIELD FOR REAR TUNNEL, REMOVING AND INSTALLING .
5. Heat Shield
   • For the tunnel center
   • Tightening Specifications:
     • Spring nuts: 2 Nm
     • Lock Washer
6. Heat Shield
   • For right front tunnel
     • Lock Washer
7. Heat Shield
   • For right front longitudinal member
   • Tightening Specifications:
     • Nut: 9 Nm
     • Clip
8. Heat Shield
   • For the plenum chamber bulkhead
     • Lock Washer
9. Heat Shield
   • For left front longitudinal member
     • Clip
10. Heat Shield
    • For left front tunnel
      • Lock Washer
11. Heat Shield
    • Tightening Specifications:
      • Spring nuts: 2 Nm