Rear Panel Sill Frame, Removing And Installing
Special tools and workshop equipment required
- Omega Clip Tool: T40280
Removing Sedan
-- Remove the luggage compartment side trim panels. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
-- Remove the nut -1-.
-- Unclip the rear panel sill frame -2- upward in direction of -arrows- and remove it.
Removing Avant
-- Remove the luggage compartment floor.
-- Remove the rail and mount. Refer to RAIL, REMOVING AND INSTALLING .
-- Remove the luggage compartment side trim panels. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, AVANT .
-- Remove the nut -arrow-.
-- Disengage the rear panel sill frame -1- and remove toward the rear.
Installing
Install in reverse order of removal.