Overview - Headlamps, 8EX
- Bolt
- Quantity: 2
- 1.5 Nm
- Housing Cover
- Filter Membrane
- Removing and Installing. Refer to FILTER MEMBRANE, REMOVING AND INSTALLING .
- Headlamp Housing
- Removing and Installing. Refer to HEADLAMP, REMOVING AND INSTALLING .
- Breather Hose
- For the headlamp housing
- Adjusting Nut
- For the headlamp height adjustment
- Bolt
- 6 Nm
- Inner Tab
- Replacing. Refer to HEADLAMP HOUSING REPAIR KIT, INSTALLING .
- Bolt
- 6 Nm
- Housing Cover
- Front Turn Signal Bulb
- Left Front Turn Signal Bulb -M5-
- Right Front Turn Signal Bulb -M7-
- 12 V, 24 W
- Bulb, Replacing. Refer to Left Front Turn Signal Bulb -M5- /Right Front Turn Signal Bulb -M7-, REMOVING AND INSTALLING .
- Bulb Socket
- With the wiring harness
- Bolt
- 6 Nm
- Outer Tab
- Replacing. Refer to HEADLAMP HOUSING REPAIR KIT, INSTALLING .
- Bolt
- 6 Nm
- Bolt
- 6 Nm
- Adjuster
- For adjusting the headlamp housing to the bumper contour
- Bolt
- Quantity: 2
- 1.1 Nm
- Actuating Shaft
- Housing Cover
- Bolt
- Quantity: 3
- 1.5 Nm
- Headlamp Beam Adjustment Motor
- Left Headlamp Beam Adjustment Motor -V48-
- Right Headlamp Beam Adjustment Motor -V49-
- Removing and Installing. Refer to Left Headlamp Range Control Adjustment Motor -V48- / Right Headlamp Range Control Adjustment Motor -V49-, REMOVING AND INSTALLING, 8EX .
- Sealing Frame
- Removing and Installing. Refer to SEALING FRAME, REMOVING AND INSTALLING .
- Headlamp Housing Mount
- Removing and Installing. Refer to HEADLAMP MOUNT, REMOVING AND INSTALLING .
- Bolt
- 6 Nm
- LED Headlamp Power Output Module 1
- Right LED Headlamp Power Output Module 1 -A27-
- Left LED Headlamp Power Output Module 1 -A31-
- Removing and Installing. Refer to Right LED Headlamp Power Output Module 1 -A27- /Left LED Headlamp Power Output Module 1 -A31-, REMOVING AND INSTALLING .
- Bolt
- Quantity: 3
- 1.5 Nm