Overview - Headlamp, 8IT, 8IY, 8JT

Fig 1: Exploded View Of Headlamp, 8IT, 8IY, 8JT

Courtesy of AUDI OF AMERICA, LLC

Headlamp Housing
- Removing and Installing. Refer to HEADLAMP, REMOVING AND INSTALLING .
Adjusting Nut
- For the headlamp height adjustment
Bolt
- 6 Nm
Breather Hose
- For the headlamp housing
Inner Tab
- Replacing. Refer to HEADLAMP HOUSING REPAIR KIT, INSTALLING .
Bolt
- 6 Nm
Bolt
- 6 Nm
Bolt
- 6 Nm
Outer Tab
- Replacing. Refer to HEADLAMP HOUSING REPAIR KIT, INSTALLING .
Bolt
- 1 Nm
Adapter
- For the height adjustment
Height Adjustment Screw
- With gasket
Bolt
- 6 Nm
Adjuster
- For adjusting the headlamp housing to the bumper contour
Headlamp Beam Adjustment Motor
- Left Headlamp Beam Adjustment Motor -V48-
- Right Headlamp Beam Adjustment Motor -V49-
- Removing and Installing. Refer to Left Headlamp Range Control Adjustment Motor -V48- / Right Headlamp Range Control Adjustment Motor -V49-, REMOVING AND INSTALLING, 8IT, 8IY, 8JT .
Bolt
- Quantity: 3
- 1.5 Nm
Housing Cover
Sealing Frame
- Removing and Installing. Refer to SEALING FRAME, REMOVING AND INSTALLING .
Headlamp Housing Mount
- Removing and Installing. Refer to HEADLAMP MOUNT, REMOVING AND INSTALLING .
Bolt
- 6 Nm
Filter Membrane
- Removing and Installing. Refer to FILTER MEMBRANE, REMOVING AND INSTALLING .
LED Headlamp Power Output Module 1
- Right LED Headlamp Power Output Module 1 -A27-
- Left LED Headlamp Power Output Module 1 -A31-
- Removing and Installing. Refer to Right LED Headlamp Power Output Module 1 -A27- /Left LED Headlamp Power Output Module 1 -A31-, REMOVING AND INSTALLING .
Bolt
- Quantity: 3
- 1.5 Nm