Front Air Duct Pipe, Removing And Installing: Removing
- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the air duct from the lock carrier. Refer to AIR DUCT ON LOCK CARRIER, REMOVING AND INSTALLING .
-- Loosen the hose clamps -1 and 2- and remove the air duct hose.
-- Disconnect the connector for the Charge Air Pressure Sensor -G31-.
-- Loosen the hose clamp -2-.
-- Free up the coolant hose on the clip -3-.
-- Remove the bolts -arrows-.
-- Remove the front air duct pipe.
-- Seal the open lines and connections with clean plugs from the Engine Bung Set :VAS 6122 .