Dimension Overview

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi S5, 2022 Audi A5 Quattro, 2021 Audi S5, 2021 Audi A5 Quattro, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Chassis	Distance between the Center of the Wheel and the Lower Edge of the Fender/Wheel Housing
	Front Axle		Rear Axle		Tolerance between the right and left
	Specified size	Tolerance	Specified size	Tolerance	Tolerance between the right and left
1BA	368 mm	± 10 mm	366 mm	± 10 mm	<= 10 mm
1BE	368 mm	± 10 mm	366 mm	± 10 mm	<= 10 mm
1BD	368 mm	± 10 mm	366 mm	± 10 mm	<= 10 mm
1BM	368 mm	± 10 mm	376 mm	± 10 mm	<= 10 mm
1BL	368 mm	± 10 mm	366 mm	± 10 mm	<= 10 mm
1BU / 1BH	391 mm	± 10 mm	398 mm	± 10 mm	Less than or equal to 10 mm
2MV	368 mm	± 10 mm	366 mm	± 10 mm	<= 10 mm
2MT / 1BC	386 mm	± 10 mm	384 mm	± 10 mm	Less than or equal to 10 mm
2MC / 2MS	367 mm	± 10 mm	371 mm	± 10 mm	<= 10 mm