Overview - Rear Lid Tail Lamps

Fig 1: Exploded View Of Rear Lid Tail Lamps

Courtesy of AUDI OF AMERICA, LLC

• A -  Rear Lid Right Tail Lamp
• 1 -  Right Tail Lamp 2 -MX6-
  • LED version: If an LED is malfunctioning, the tail lamp must be completely replaced
  • Removing and installing. Refer to LOWER TAIL LAMP, REMOVING AND INSTALLING .
  • Adjusting. Refer to REAR LID TAIL LAMP, ALIGNING WITH BODY CONTOUR .
• 2 -  Nut
  • Tightening specifications. Refer to Fig 2.
  • Quantity: 3
• 3 -  Seal
  • Replace if damaged.
• 4 -  Back-Up Lamp Bulb -M107-
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 5 -  Bulb Socket
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 6 -  Right Tail Lamp Bulb -M2-
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 7 -  Bulb Socket
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 8 -  Bulb Socket
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 9 -  Right Tail Lamp Bulb -M2-
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 10 -  Cover
  • For the tail lamp
  • Removing and installing. Refer to REAR LID TAIL LAMP, REMOVING AND INSTALLING .
• B -  Rear Lid Left Tail Lamp
• 1 -  Cover
  • For the tail lamp
  • Removing and installing. Refer to REAR LID TAIL LAMP, REMOVING AND INSTALLING .
• 2 -  Seal
  • Replace if damaged.
• 3 -  Rear Fog Lamp Bulb -M108-
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 4 -  Bulb Socket
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 5 -  Left Tail Lamp Bulb -M4-
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 6 -  Bulb Socket
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 7 -  Bulb Socket
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 8 -  Left Tail Lamp Bulb -M4-
  • Bulb, Replacing. Refer to REAR LID TAIL LAMP BULB, REMOVING AND INSTALLING .
• 9 - 

  Nut

  • Tightening specifications. Refer to Fig 2.
  • Quantity: 3
• 10 -  Left Tail Lamp 2 -MX5-
  • LED version: If an LED is malfunctioning, the tail lamp must be completely replaced
  • Removing and installing. Refer to LOWER TAIL LAMP, REMOVING AND INSTALLING .
  • Adjusting. Refer to REAR LID TAIL LAMP, ALIGNING WITH BODY CONTOUR .

Tightening Specification and Sequence for the Tail Lamps 

Fig 2: Tail Lamps Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nuts for the tail lamps to 4 Nm and in the sequence -1, 2 and 3-.