Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING, VERSION 1: Removing
WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Disconnect the connector -1-.
-- Press both of the release buttons -2 to 3- and remove the lines from the Secondary Air Injection Pump Motor -V101-.
-- Remove the nuts -arrows- and remove the Secondary Air Injection Pump Motor -V101- with the bracket.