Coolant Pump, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
-- Loosen the bolts -1 through 4- and remove the coolant pump from the Engine Temperature Control Actuator -N493-.
-- Remove the toothed belt from the coolant pump.
TIP:
If the coolant pump cannot be removed as described, remove the Throttle Valve Control Module -GX3-. Refer to Throttle Valve Control Module -GX3-, REMOVING AND INSTALLING .