Coolant Pump Toothed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Note the toothed belt sprocket installation location -item 12- OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT, ENGINE WITH Engine Temperature Control Actuator -N493-.
Replace bolts that were tightened with an additional turn after removing them.

-- Install the Oil Pressure Switch, Level 3 -F447-. Refer to Oil Pressure Switch, Level 2 -F446- /Oil Pressure Switch, Level 3 -F447-, REMOVING AND INSTALLING .

There are additional procedures depending on the model. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .