Oil Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Oil Baffle Bolt

Courtesy of AUDI

-- Remove the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .

-- Remove the bolt -arrow- and then remove the oil baffle.

-- Pull the wire clip from the chain tensioner tension spring with the Elbow Assembly Tool: T10118 in the direction of -arrow- and lock with the Chain Tensioner Locking Tool: T40265 .

Fig 2: Identifying Chain Tensioner Spring, Remove/Install Components

Courtesy of AUDI

-- Remove the bolts -arrows- and remove the oil pump.

Fig 3: Locating Oil Pump Bolts

Courtesy of AUDI