Oil Separator, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cylinder ignition coils "3 and 4". Refer to IGNITION COILS, REMOVING AND INSTALLING .
-- Release the catches -arrow-, remove the bolt -2-, and remove the hose -1- for the crankcase ventilation and free it up.
-- Loosen the hose clamp -1- and remove the hose from the EVAP Canister Purge Regulator Valve 1 -N80-.
-- Remove the bolts -arrows- and the oil separator.