Turbocharger Recirculating Valve -N249-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Loosen the hose clamps -1 and 2- and remove the air duct pipe.

Fig 1: Identifying Clamps With Air Guide Pipe

Courtesy of AUDI

-- Disconnect the connector -2-.

Courtesy of AUDI

-- Remove the bolts -arrows- and carefully remove the Turbocharger Recirculation Valve -N249-.