Overview - Turbocharger, Part II
WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
- O-Ring
- Always replace after removing
- Connection
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Turbocharger Recirculation Valve -N249-
- Installation position. Refer to Fig 2.
- Removing and installing. Refer to Turbocharger Recirculating Valve -N249-, REMOVING AND INSTALLING .
- O-Ring
- Not available separately, included in the Turbocharger Recirculation Valve -N249- delivery package
- Turbocharger
- Removing and Installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- Bolt
- Coat the thread with hot bolt paste. Refer to the appropriate Electronic Parts Information.
- 30 Nm
- O-Ring
- Always replace after removing
- coat with engine oil
- Coolant Return Line
- Bolt
- 9 Nm
- Bolt
- Always replace after removing
- 20 Nm +90°
- Bracket
- For the turbocharger
- Bolt
- 9 Nm
- O-Ring
- Always replace after removing
- Coat with coolant
- Bolt
- 9 Nm
- Oil Return Line
- Bolt
- 9 Nm
- O-Rings
- Always replace after removing
- coat with engine oil
Turbocharger Recirculation ValveN249 Installation Position
-- Note the installation location -arrows-.