Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Disconnect the connector -2-.

Fig 1: Component Location Charge Air Pressure Sensor -G31-

Courtesy of AUDI

-- Remove the bolts -1- and remove the Charge Air Pressure Sensor -G31- from the air duct pipe.