Timing Chain Cover, Removing And Installing, Engine With Two Camshaft Adjusters: Removing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work may be required depending on the model. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the camshaft adjustment valves. Refer to Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING .

-- Free up the clip -2- for the wiring harness.

Fig 1: Identifying Oil Dipstick Guide Tube

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- If necessary, unclip the oil dipstick tube from the upper timing chain cover in direction of -arrow-.

-- Remove the bolts -1 through 6- and the upper timing chain cover.

Fig 2: Timing Chain Cover Tightening Sequence (1 of 2)

Courtesy of AUDI OF AMERICA, LLC

-- If necessary, remove the bolts -3 and 5-.