Timing Chain Cover, Removing And Installing, Engine With Two Camshaft Adjusters: Installing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Replace the seals and O-rings after removal.

-- Coat the seals and the O-rings with engine oil.

Seal installation position: smaller inner diameter outward.

-- Install the camshaft adjustment valves. Refer to Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING .

There are additional procedures depending on the model. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING .