Bearing Bracket, Removing And Installing, Engine With One Camshaft Adjuster: Notes

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Assembly Tool:T10352C , Assembly Tool:T10352/3 and Assembly Tool:T10352/4

Fig 1: Assembly Tool
Courtesy of AUDI OF AMERICA, LLC
Chain Tensioner Lever:T40243

Fig 2: Chain Tensioner Lever
Courtesy of AUDI OF AMERICA, LLC
Wrench - 21mm:T40263

Fig 3: Identifying Wrench - 21mm
Courtesy of AUDI OF AMERICA, LLC
Tensioner Locking Tool:T40267

Fig 4: Tensioner Locking Tool
Courtesy of AUDI OF AMERICA, LLC
Adapter:T40314

Fig 5: Adapter T40314
Courtesy of AUDI OF AMERICA, LLC