Drive Plate, Removing And Installing: Notes

Special tools and workshop equipment required 

• Flywheel Lock Adapter:VW 558 
  Fig 1: Counter Hold VW 558

  Courtesy of AUDI
• Depth Gauge:VAS 6082 
  Fig 2: Depth Gauge (VAS6082)

  Courtesy of AUDI
• M8x40 Bolt
• M8 Nut

Flywheel Lock Adapter:VW 558  , Preparing:

Fig 3: Identifying Flywheel Lock Adapter -VW 558- And Bolt

Courtesy of AUDI

-- Tighten the M8x40 bolt with the M8 nut on the Flywheel Lock Adapter:VW 558  .

Removing

Fig 4: Identifying Flywheel Lock Adapter -VW 558- Installed To Cylinder Block And Drive Plate

Courtesy of AUDI

-- Insert the Flywheel Lock Adapter:VW 558  in the cylinder block and in the hole -A- on the drive plate.

-- Remove the bolts and remove the drive plate.