Ribbed Belt, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model, preliminary work may be required. Refer to RIBBED BELT, REMOVING AND INSTALLING .

Depending on the Model: Audi S3 and SQ3 Vehicles:

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

Continuation for All Vehicles:

CAUTION:

Risk of destroying a used ribbed belt by reversing the running direction.

- Mark the running direction before removal.

- Pay attention to the running direction when reinstalling.

-- Mark the running direction using chalk or a felt-tip pen.

-- Turn the tensioner in the direction of -arrow- to release the tension on the ribbed belt.

Fig 1: Ribbed Belt For Vehicles With Electro-Mechanical Power Steering

Courtesy of AUDI

-- Secure the tensioner using the Locking Pin:T10060 A .

-- Remove the ribbed belt.