Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the ribbed belt. Refer to Figure.

-- Turn the tensioning system slightly in the direction of -arrow- and remove the Locking Pin:T10060 A .

Fig 1: Ribbed Belt For Vehicles With Electro-Mechanical Power Steering

Courtesy of AUDI

-- Release the tension on the tensioner.

-- Check whether the ribbed belt is routed correctly.

-- Start the engine and check whether the ribbed belt runs correctly.

There are different procedures depending on the model. Refer to RIBBED BELT, REMOVING AND INSTALLING .