Sensor Wheel, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Always replace the sensor wheel -2- each time the bolts -1- are loosened.
- After tightening a second time, the attachment point of the countersunk bolts in the sensor wheel is so deformed that the bolt heads are at the crankshaft -3- -arrows- and the sensor wheel is loose under the bolts.
- Installing the sensor wheel is only possible in one position - the bores are offset.
-- After replacing the sensor wheel perform an adaptation using the Vehicle Diagnostic Tester.