LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> Q3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Crankshaft, Cylinder Block (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine (Ea 888 Generation III)) (DSNA)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Engine Support, Removing And Installing >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Support - Tightening Sequence
GWWA10-11481Courtesy of AUDI
scientia non olet · About LEMON Manuals