LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> Q3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Exhaust System, Emission Controls (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine (Ea 888 Generation III)) (DSNA)) >> 26 Exhaust System, Emission Controls >> Exhaust Temperature Regulation >> Exhaust Temperature Regulation Components, Removing And Installing

Exhaust Temperature Regulation Components, Removing And Installing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Exhaust Gas Temperature Sensor 3 -G495- : remove the rear noise insulation. Refer to OVERVIEW - NOISE INSULATION .

All additional procedures are described under: EXHAUST TEMPERATURE REGULATION COMPONENTS, REMOVING AND INSTALLING .

Tightening Specifications

scientia non olet · About LEMON Manuals